BICYCLE LIGHTS LAW REQUIRMENTS IN Utah
In US the bike lights die required by Law if you reading in low light conditions, The light can be attached to either the bike or to the cyclist but must be visible at least 500 feet to the front of the bicyde, so be careful how you position the light. Additional light! ng must be con¬sistent with the law specifying required lights and reflectors, so a rear light must be red.
2010 Utah Code
Title 41 - Motor Vehicles
Chapter 06a - Traffic Code
41-6a-1114 - Bicycles -- Lamps and reflective material required.
41-6a-1114. Bicycles -- Lamps and reflective material required.
(1) Every bicycle in use at the times described in Section 41-6a-1603 shall be equipped with a:
(a) lamp of a type approved by the department which is on the front emitting a white light visible from a distance of at least 500 feet to the front; and
(b) (i) red reflector of a type approved by the department which is visible for 500 feet to the rear when directly in front of lawful lower beams of head lamps on a motor vehicle; or
(ii) red taillight designed for use on a bicycle and emitting flashing or nonflashing light visible from a distance of 500 feet to the rear.
(2) Every bicycle when in use at the times described in Section 41-6a-1603 shall be equipped with:
(a) reflective material of sufficient size and reflectivity to be visible from both sides for 500 feet when directly in front of lawful lower beams of head lamps on a motor vehicle; or
(b) in lieu of reflective material, a lighted lamp visible from both sides from a distance of at least 500 feet.
(3) A bicycle or its rider may be equipped with lights or reflectors in addition to those required by Subsections (1) and (2).
Use this Promocode for a 20% Off
Copy the code to clipboard